How to Use This Guide
Chapter 7, “General Troubleshooting,”
can be used to identify the location of a problem to a
board or functional area in the spectrum analyzer.
Chapters 8 through 13, which cover the functional areas, can then be used to help you localize
the problem further.
Once the faulty area is identified, the adjustments and parts information located in chapters 1
through 6 is available to help you fix the problem.
This
guide
uses
the
following
conventions:
Front-panel
Key)
This represents a key physically located on the instrument.
Sof
tkq
This indicates a “softkey,”
a key whose label is determined by the instrument
firmware.
Screen Text
This indicates text displayed on the spectrum analyzer screen.
Documentation Outline
HP 8560 E-Series Spectrum Analyzer Calibration Guide
n Tells you how to run verification software.
n Tells you the specifications of your spectrum analyzer.
n Tells you how to test your spectrum analyzer.
HP 8560
E-Series
Spectrum
Analyzer
User’s Guide
n Tells you how to make measurements with your spectrum analyzer.
n Tells you how to install the spectrum analyzer.
n Tells you how to program your spectrum analyzer.
HP 8560 E-Series Spectrum Analyzer Quick Reference Guide
n Is an abbreviated version of the HP 8560 E-Series Spectrum Analyzer User’s Guide.
n Provides you with a listing of all remote programming commands.
HP 8560 E-Series Spectrum Analyzer Component Level Information
n Provides schematics and parts lists for the instrument.
vi
To Next Page
Loading...
Need help?
General
