596
Chapter 8, Programming The Call Processing Subsystem
CALL BIT Screen Message Field Descriptions
FVC SSD2 Message Fields
Figure 73 FVC SSD2 Message Fields
T1T2
This field identifies the received message as an order confirmation, an order, or a called
address message.
2 binary characters required.
RANDSSD_2
The subsequent 24-bits (following RANSSSD_1) of the random number issued by the
base station in the SSD Update Order.
24 binary characters required.
Parity
Parity field. The contents of the Parity field cannot be set by the user. The Test Set
calculates the parity bits.
RSVD
Reserved for future use.
2 binary characters required.
To Next Page
Loading...
