HP 8920B - Page 598

598
Chapter 8, Programming The Call Processing Subsystem
CALL BIT Screen Message Field Descriptions
FVCBSCon Message Fields
Figure 75 FVCBSCon Message Fields
T1T2
This field identifies the received message as an order confirmation, an order, or a called
address message.
2 binary characters required.
RSVD1
Reserved for future use.
4 binary characters required.
AUTHBS
Output response of the authentication algorithm initiated by the Base Station Challenge
order.
18 binary characters required.
RSVD2
Reserved for future use.
4 binary characters required.
Parity
Parity field. The contents of the Parity field cannot be set by the user. The Test Set
calculates the parity bits.