HP 9000 300 Series - How to Use this Manual

1
How to Use This Manual
If you already know how your controller system is configured for:
• Mass storage devices,
• Internal interfaces,
• LAN type,
• Graphics type, and
• Accessory cards,
you can skip chapter
2.
If you need to know how your controller system is configured, you should:
1. Go to chapter 2,
2. Read and follow its instructions and
3. Find out how your controller system is configured.
If you need to reconfigure your controller system, you should refer to Table 1-1
below
and find out what procedures to follow.
1-2 Using This Manual