HP 972a - Page 10

Minimum/Maximum
1
Press Action Main Display Secondary Display
2
Begin recording of
minimum and maximum values
Each measured value Elapsed time
Display recorded maximum Maximum measurement Time of Maximum
Display recorded minimum Minimum measurement Time of Minimum
Display last recorded measurement Latest measurement Elapsed time
Pause recording of
minimum and maximum values
3
Holds display Total elapsed time
Resume recording of
minimum and maximum values
Each measured value Elapsed time
Press and hold 1 second to cancel ——
1
Automatic power off and auto ranging are disabled when Min/Max is selected. Bargraph will indicate and
hold the maximum values of the bargraph.
2
Time is recorded and displayed in minutes up to the maximum recording time of 1999 minutes.
Recording will stop at the maximum time.
3
H annunciator is displayed when Min/Max recording
Average
Press Action Main Display Secondary Display
Makes the displayed measurement the
average of the last eight measurements
Average value of last eight
measurements
Range
Disables the averaging of measurements Each measurement Range
Operation
1 - 10