Replaceable Parts/Accessories
Refer to the disassembly diagram on page 6-5.
Call out Description HP Part Number
F1
Fuse, 500 mA, 250 V fast blow Littlefuse 216-500
DO NOT SUBSTITUTE
2110-0940
F2
Fuse, 15 A, 600 V fast blow Littlefuse KLK15
DO NOT SUBSTITUTE
2110-0941
MP1 Top case assembly 00972-64401
00973-64401
MP2 Dust/moisture seal 00971-64403
MP3 Bottom case assembly (includes stand) 00972-64402
Replacement Test Leads, 2 pair E2305A
Temperature probe,
5 KΩ Thermistor
E2308A
Surface temperature sensor,
Thermistor ±0.1°C
12" lead, requires dual banana plug
40653B
Temperature probe, K type thermocouple for
973A only
E2307A
Rubber Boot 00971-86001
Soft Case
(fits meter with rubber boot)
E2304A
Operator protection from electric shock hazard is provided by a double insulated enclosure.
Refer to the Safety Summary for maximum voltage specifications. When servicing, use only
specified replacement parts.
6 - 4
To Next Page
Loading...
