24
Beyond the Basics: Manual Two–Sided Printing
Manual Two–Sided Printing
I should… Guidelines…
Book Binding
Tablet Binding
1 Remove all paper from the OUT tray.
2 Load paper into the IN tray.
3 Slide the paper guides snugly against
the sheets.
4 Push in the IN tray.
5 From your software program’s File
menu, select Print.
6 Choose the print settings that match the type and
size of your paper.
Page Setup:
•
Paper Size:
Choose
appropriate size
•
Orientation:
Choose
appropriate orientation
Paper Type/Quality:
•
Paper Type:
Choose
appropriate type
•
Print Quality:
Choose
Normal
Layout:
•
Pages per Sheet:
1 (Normal)
•
Print Both Sides:
Check this box, then choose
the
Book
icon (for binding on the side) or
Tablet
icon (for binding at the top). Uncheck
Automatic
.
7Begin printing.
8 Carefully follow the reloading instructions
displayed on your computer screen.
9 When the paper is properly reloaded, click
Continue
.
• You can do manual Two-Sided Printing with
either the Rear Access Door or the
Automatic Two-Sided Printing Module
attached.
• The printer automatically prints the odd-
numbered pages first. The printer then
displays a message on your computer
screen that tells you how to reload the
paper to print the even-numbered pages.
To Next Page
Loading...
