For
HP
Internal Use
Only
Cabinet Removal and Replacement
This section describes
the
procedure for replacing a damaged
part.
Refer
to
Table 8-4 for a
list
of
the
cabinet
parts
that
can
be
replaced
if
damaged.
The
1.1
meter
and
1.6
meter
cabinet are identical except for vertical height. All
parts
are
removed
and
replaced
the
same. For this reason, only
the
1.6 rneter cabinet is shown.
The
only
parts
that
are different between
the
1.1
meter
cabinet
and
1.6
meter
cabinet are
the
rear
door,
top
cap, base cover,
and
side covers.
Refer
to
Figure 8-31
and
Figure 8-32 while performing
the
procedures outlined
in
this
section.
Replaceable Parts 8-57
To Next Page
Loading...
Need help?
General
