HP 9x9KS Series Handbook

For HP Internal Use Only
Table
2-2. 2-Siot and 4-slot Chassis Power Specifications
Description
Specification
AC Input Voltage Range
1
90 to 132 VAC and 180 to 264 VAC
AC Input Current
6.5 A maximum load @ 100 VAC
3.5 A maximum load@ 240 VAC
2.4 A typical load@ 100 VAC & 50 Hz
2.1 A typical load@ 120 VAC & 60Hz
1.3 A typical load @ 208 VAC & 60 Hz
1.3 A typical load @ 220 VAC & 50 Hz
1.2 A typical load@ 240 VAC & 50 Hz
AC Inrush Current
50 amperes peak, one cycle
AC Input Power
380
watts maximum, 230 watts typical
Power Supply Output Rating
240 watts DC continuous
AC Input Line Frequency
47 to
63Hz
Transient Tolerance
Low Energy
3000 volts, 10j-ts, 500 ns rise/fall
High Energy
1000 volts, 1.2j-ts rise
Holdup without System Reset
20 ms @ 50 Hz (1 cycle)
Battery Backup Time 15 minutes with optional
600 VA PowerTrust UPS
Note
"
1
The power supply is an auto-ranging power supply. It does not have to be
reconfigured
to operate over its rated operating ranges. However, the system
should
not be operated at voltages between the two input voltage ranges.
The power supply can provide power for up to four internal peripherals.
2-2 Environmental Information

HP 9x9KS Series Specifications

General

Brand	HP
Model	9x9KS Series
Category	Desktop
Language	English