38 Reference
SCR Reference (man Pages)
scr (5) - Track Configuration Changes with SCR
All configuration snapshots are listed above.
Administrators can limit the scope of the list by time period and
managed nodes, as required. For example, to limit the time period,
use the -p option:
# scrhist -p 19990101 19990226
# scrhist -p 19990401 latest
To limit managed nodes, use the -n option:
# scrhist -n node2
• Check modification points with the scrdiff command, which lists
configuration differences. Configuration differences are indicated
with an asterisk(*) at the beginning of each line. For example, the
change to managed node, node2, at two time periods is displayed
below.
# scrdiff node2:199902141205 node2:latest
[BASE] node2 : 02/14/1999 12:05 PST
[TARGET] node2 : 04/10/1999 13:05 PDT (latest)
No filter applied.
COMPONENT NAME BASE TARGET
GROUP NAME
ATTRIBUTE NAME
"HP-UX Standard Groups Definition"
"Host File System"
* [Host File System Index] - 11
* [Mount Point] -
node4:/SCR
* [Remote Mount Point] - node4
* [File System Type] - nfs
* [File System Access] -
1:Read-Write
:
:
:
The output indicates the change is the mounted file system /SCR
provided by node4. The difference between different managed nodes
can also be displayed. For example, to compare two nodes, node1 and
node2:
To Next Page
Loading...
Need help?
General