Displaying and maintaining NQA
To do… Use the command… Remarks
Display history records of NQA
test groups
display nqa history [ admin-name
operation-tag ] [ | { begin | exclude | include }
regular-expression ]
Display the current monitoring
results of reaction entries
display nqa reaction counters [ admin-name
operation-tag [ item-number ] ] [ | { begin |
exclude | include } regular-expression ]
Display the results of the last NQA
test
display nqa result [ admin-name
operation-tag ] [ | { begin | exclude | include }
regular-expression ]
Display statistics of test results for
the specified or all test groups
display nqa statistics [ admin-name
operation-tag ] [ | { begin | exclude | include }
regular-expression ]
Display NQA server status
display nqa server status [ | { begin | exclude
| include } regular-expression ]
Available in any view
NQA configuration examples
ICMP echo test configuration example
Network requirements
As shown in Figure 6, configure NQA ICMP echo tests to test whether the NQA client (Device A) can
send packets through a specific next hop to the specified destination (Device B) and test the round-trip
time of the packets.
Figure 6 Network diagram for ICMP echo tests
30
To Next Page
Loading...
Need help?
General
