HP AlphaServer ES47

Commands
MBM> sh part -hp USA_branch -sp hr
-----------------------------------------------------------------
Hard Partition : HP Name = USA_branch, HP No.= 0, SP count = 2
Attributes : max CPUs = 32, SP type = soft, Non-stripe
Power Stae : Power Off
Physical Memory: 8192MB (8.000GB)
Community Memory: 0MB (0.000GB)
Sub Partition: HP Name = USA_branch, HP No.= 0
SP Name = hr, SP No.= 0
State = Not Running, Telnet port = 323
Assigned Memory: 1024MB (1.000GB)
CPUs:
Cab Drw CPU (NS,EW) PID Type
0 0 0 ( 0,0 ) 0 Primary
0 0 2 ( 0,1 ) 2 Non-primary
0 0 4 ( 0,2 ) 4 Non-primary
0 0 6 ( 0,3 ) 6 Non-primary
0 0 1 ( 1,0 ) 1 Non-primary
0 0 3 ( 1,1 ) 3 Non-primary
0 0 5 ( 1,2 ) 5 Non-primary
0 0 7 ( 1,3 ) 7 Non-primary
IOPs:
SBB PCI Drawer
Cab Drw IOP (NS,EW) Cab Drw IOR Status
0 0 0 ( 0,0 ) --------- 1 1 0 P
0 0 2 ( 0,1 )
0 0 4 ( 0,2 )
0 0 6 ( 0,3 )
0 0 1 ( 1,0 )
0 0 3 ( 1,1 )
0 0 5 ( 1,2 )
0 0 7 ( 1,3 )
MBM>
3. Show partitions in brief format.
MBM> sh part -b
Partition Name CPU Count IO Count State Telnet Port
hp0 32 max Power Off
Default_SP 16 2 Not Running 323
hp1 32 max Power Off
Default_SP 8 1 Not Running 324
MBM>
See Also
create partition, delete partition
3-105