Commands
3.38 save partition
Saves the partition database. This command saves the volatile partition state to the non-volatile
storage NVRAM. All partition data is saved if no explicit partition is given. An entire hard partition
must be saved; a particular subpartition cannot.
Syntax
save partition
[-hp <hard_partition>, -all]
Arguments
None
Options
-hp <hard_partition> Hard partition name.
-all All partitions.
Examples
1. Save all subpartitions under the hard partition account_dept.
MBM>save partition -hp account_dept
MBM>
2. Save all partitions.
MBM>save partition
or
MBM>save partition -all
MBM>
See Also
show partition, create partition, delete partition
3-63
To Next Page
Loading...
Need help?
General