HP B2600 Workstation Disassembly November 2005
Page 17
6.
Remove the two screws from the corners of the second PCB card.
7.
Remove the PCB cards from the chassis. Cut or unsolder the wires connecting them.
Ensure that all capacitors are safely discharged. Use a diagonal cutter to remove the
desired components from both PCB cards. (Note that some components may need to be
unsoldered if a diagonal cutter does not fit between the component and the PCB card.)
8.
Dispose of all removed components according to regulatory requirements.
To Next Page
Loading...
Need help?
General