Reference 47
SCR Reference (man Pages)
scrconfig (1M) - Set Data Collection Interval Time
Set Data Collection Interval Time
Set the interval time for node1 to one week:
# scrconfig -n node1 -i 1w
Stop Data Collection Schedule
Stop monitoring activity for node2:
# scrconfig -n node2 -s off
NOTE
Default parameters are effective only for managed nodes registered
after the default value is set or modified. The value is not applied to the
nodes registered before the default value is modified.
FILES
/var/opt/scr/log/scrlog.log Contains managed node addition or
deletion, parameter modification log.
SEE ALSO
scrdelete (1M), scrupdate (1M), scr (5).
To Next Page
Loading...
