The table below shows the available AF area settings.
Icon Item Description
Wide The camera automatically selects focus area within the wide frame.
Center The focus area is fixed on the center.
Setting the AF Lamp
The AF Lamp function allows you to record images even low light
conditions.
If AF Lamp is set to Auto, the AF lamp located in the front of the
camera, see “Front View” on page 9, emits an red light by half
pressing the Shutter button allowing the camera to focus easily.
To set AF Lamp
From the Record menu, select AF Lamp.1.
Use the 2. or keys to go through the selection.
Press the 3. OK button to save and apply changes.
Setting Sharpness
This function allows you to enhance or soften finer details of your
photos.
To set Sharpness
From the Record menu, select 1. Sharpness.
Use the 2.
or keys to go through the selection.
Press the 3. OK button
to save and apply changes.
The table below shows the available Sharpness settings:
Icon Item Description
High Sharpens the image.
Normal Medium sharpness.
Low Softens the image.
To Next Page
Loading...
