HP CM1015 - Color Laserjet All

NOTE If the 2ndary Service menu is already unlocked, skip to step 4.
1. Press Menu.
2. Press and hold the Left arrow and Cancel buttons simultaneously.
3. Release the Left arrow and Cancel buttons.
4. Press Menu.
5. Press the navigation arrows to select 2ndary Service.
6. Press OK.
7. Press the navigation arrows to select Color cal..
8. Press OK.
9. Press the navigation arrows to select Adjust color.
10. Press the navigation arrows to select the desired calibration choice.
●
Contrasts
●
Highlights
●
Midtones
●
Shadows
11. Press OK.
12. Press the navigation arrows to select the desired color density.
●
Cyan
●
Magenta
●
Yellow
●
Black
13. Press OK.
14. Press the navigation arrows to select the desired color setting.
15. Press OK.
Memory cards
This feature allows you to enable or disable the photo memory-card slots.
NOTE If the 2ndary Service menu is already unlocked, skip to step 4.
1. Press Menu.
2. Press and hold the Left arrow and Cancel buttons simultaneously.
152 Chapter 6 Troubleshooting ENWW