2. Clean the glass by using a soft, lint-free cloth or sponge that has been moistened with nonabrasive
glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the product; these can damage the product. Do not place liquids directly
on the glass. They might seep under it and damage the product.
3. Clean the scanner strip (ADF models only) by using a soft, lint-free cloth or sponge that has been
moistened with nonabrasive glass cleaner..
4. To prevent spotting, dry the glass by using a chamois or cellulose sponge.
196 Chapter 14 Manage and maintain the product ENWW
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...