6
Print
Print on both sides (duplex)
Use automatic duplex printing
1
Insert enough paper into one of the trays to accommodate the
print job. If you are loading special paper such as letterhead,
load it in one of the following ways:
● For tray , load the letterhead paper face-up with the bottom
edge feeding into the printer rst.
● For all other trays, load the letterhead paper face-up with
the top edge at the back of the tray.
2
Open the printer driver and click the Finishing tab.
3
Click Print on both sides.
4
If you will bind the document along the top edge, click Flip
pages up.
5
Click OK.
2
3
4
5
To Next Page
Loading...
