Installing the Software 23
■ Select Colorado Backup for Windows 95.
■ Select Colorado Backup.
The Recovery Disk Creation screen appears:
11. Click on the Create Recovery Disks button. The following screen
appears:
12. Insert the formatted, 3.5” (1.44 MB) diskette labeled “Recovery Disk #1”
into your floppy drive. You must use your primary, or bootable floppy
drive.
13. When prompted, remove Recovery Disk #1 from the drive and insert the
diskette labeled “Recovery Disk #2.” Click on OK to continue.
To Next Page
Loading...
