24 Installation Guide
14. Click on Continue. When all the necessary files have been copied to the
diskette, the following screen appears:
15. Remove “Recovery Disk #2” from the floppy drive and write protect both
diskettes. Store the two recovery disks together in a safe place.
16. Click on OK. The Colorado Backup main window appears.
17. If the Colorado Backup window does not appear or you receive an error
message, see “If You Have Problems...” on page 27.
If you are ready to perform tape operations, read:
■ “Using Tapes and Caring for Your Drive” on page 30.
■ Read the User’s Guide or the online Help to learn how to back up and
restore data, compare files, and use the application’s options and
features. To read the online help while you are using Colorado
Backup, select Help from the menu bar.
You can also read the online User’s Guide. To do this, insert the
software installation CD, click on Start, Run, type
(where D: is your CD-ROM’s drive letter), then click on the User’s
Guide button.
To Next Page
Loading...
