10. Replace the computer access panel.
11. Reconnect the power cord and turn on the computer.
12. Lock any security devices that were disengaged when the computer access panel was removed.
13. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide on the
Documentation and Diagnostics CD for instructions about using Computer Setup.
NOTE If you replaced the primary hard drive, use the Restore Plus! CD set that you created
when you initially set up the computer to restore the operating system, software drivers, and
any software applications that were preinstalled on the computer. When the restore process
has completed, reinstall any personal files that you backed up before replacing the hard
drive.
ENWW Installing Additional Drives 35
To Next Page
Loading...
