Removal and Replacement Procedures
Maintenance and Service Guide 6–51
1. Prepare the computer for disassembly (Section 6.3),
and then remove the following components:
a. Hard drive (Section 6.4)
b. Bluetooth board (Section 6.6)
c. Optical drive (Section 6.9)
d. Keyboard (Section 6.10)
e. Switch cover (Section 6.11)
f. Fan (Section 6.13)
g. Heat sink (Section 6.14)
h. RTC battery (Section 6.18)
i. Display assembly (Section 6.19)
j. Top cover (Section 6.20)
k. Speaker (Section 6.21)
l. Digital media board (Section 6.22)
m. USB/audio board (Section 6.23)
To Next Page
Loading...
