EasyManuals Logo

HP Compaq nc6220 Getting Started

HP Compaq nc6220
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Hardware Setup
Getting Started 1–9
Step 4: Connect the Notebook to
External Power
āœŽ
Only compatible AC adapters and battery packs should be used
with the notebook. For additional information, visit the HP Web
site at
http://www.hp.com or use the Worldwide Telephone Numbers
booklet (English only), included with your notebook, to contact
Customer Care.
To connect the notebook to external AC power:
1. Plug the AC adapter cable 1 into the power connector on the
notebook.
2. Plug the power cord 2 into the AC adapter, and then into the
electrical outlet 3.

Table of Contents

Other manuals for HP Compaq nc6220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq nc6220 and is the answer not in the manual?

HP Compaq nc6220 Specifications

General IconGeneral
Display14.1-inch TFT
Maximum Memory4 GB
Hard Drive InterfaceATA-100
GraphicsIntel Graphics Media Accelerator 900
Operating SystemWindows XP Professional
Battery LifeUp to 4 hours
ProcessorIntel Pentium M
Display Resolution1024 x 768
Storage40 GB
Networking10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical DriveDVD-ROM
RAM512 MB to 2 GB

Related product manuals