HP Compaq nc6220 Getting Started

1–12 Getting Started
Hardware Setup
Step 6: Turn on the Notebook
To turn on the notebook:
» Press and release the power button 1.
The power light 2 is turned on. After the system completes
the startup process, you will be prompted to begin software
setup. For information and instructions about the software
setup procedure, refer to
Chapter 2, “Software Setup.”

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB