HP Compaq nc6220 Getting Started

Troubleshooting
Getting Started A–5
■ To switch the image to the notebook screen, press fn+f4:
❏ On most notebook models, when an optional external
display device, such as a monitor, is connected to the
notebook, the image can be displayed at any time on
the
notebook screen, the external display, or on both the
notebook screen and the external display simultaneously.
When you press fn+f4,
the image is switched among the
notebook, one or more external display devices, and
simultaneous display.
❏ On some notebook models, the function of fn+f4 is
determined by the software you are using. For information
about the fn+f4 functions on your notebook, refer to the
hotkeys section of the Hardware and Software Guide,
which is located on the Notebook Documentation CD.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB