Removal and Replacement Procedures
Maintenance and Service Guide 5–7
5. Remove the hard drive by following these steps:
a. Loosen the 2 PM2.0×4.0 screws 1 that secure the hard
drive cover to the notebook.
b. Lift the left side of the hard drive cover and swing it to
the
right 2.
c. Remove the hard drive cover.
✎
The hard drive cover is included in the Miscellaneous
Plastics Kit, spare part number 378236-001.
Removing the Hard Drive Cover
To Next Page
Loading...
Need help?
General
