8. Lift the stand up and off the computer to expose the VESA mounting holes.
Figure 2-13 Removing the Stand
The computer is now ready to be attached to a VESA-compliant mounting fixture.
Figure 2-14 VESA Mounting Holes
Connecting a Second Display
The DisplayPort connector on the rear of the computer allows you to connect a second display to the
computer.
If you are adding a second display that has a DisplayPort connector, then no DisplayPort video adapter
is required. If you are adding a second display that does not have a DisplayPort connector, you can
purchase a DisplayPort video adaptor from HP for your configuration.
DisplayPort adapters and video cables are purchased separately. HP offers the following adapters:
●
DisplayPort to VGA adapter
●
DisplayPort to DVI adapter
●
DisplayPort to HDMI adapter
18 Chapter 2 Hardware Repair and Upgrade
To Next Page
Loading...
