11. Slide the new hard disc drive, or drive adapter holding an optional 2.5-inch drive, into the cage
until it snaps in place. Be sure that the connector on the hard disc drive is at the opening of the
cage.
Figure 2-32 Inserting the Hard Disc Drive into the Cage
12. With the hard disc drive connector facing toward the center of the chassis, place the hard disc
drive cage into the chassis and slide it toward the center until it snaps into place.
Figure 2-33 Installing the Hard Disc Drive Cage
32 Chapter 2 Hardware Repair and Upgrade
To Next Page
Loading...
