2-14 Hardware Upgrades
Compaq Confidential - Need to Know Required
Writer: Beth Zanca Part Number: 190709-001 File Name: ch2.doc
Last Saved On: 04/12/00 1:02 PM Last Saved By: Lydia Sanchez
Installing Additional Drives
Drive Bay Components
Your workstation supports up to seven drive bays. See the following
list for a description of the drive bay components.
Identifying drive bay components
The workstation provides seven drive bays. Bays 1 through 3 are
located in the 3.5-inch removable hard drive cage, which is located
behind the workstation access panel of the workstation. Drive bays 4
through 7 are located on the front of the workstation. The drives
support various drive configurations.
1
Bay 1 Part of the removable hard drive cage. A 3.5-inch,
third-height bay that supports a 1.0-inch hard drive or a
1.6-inch hard drive.
2
Bay 2 Part of the removable hard drive cage. A 3.5-inch,
third-height bay that supports a 1.0-inch hard drive. Bay 2 is
not available when a 1.6-inch hard drive is installed in either
bay 1 or bay 3.
3
Bay 3 Part of the removable hard drive cage. A 3.5-inch,
third-height bay that supports a 1.0-inch hard drive or a
1.6-inch hard drive.
To Next Page
Loading...
