Hardware Reference Guide G-3
Compaq Confidential - Need to Know Required
Writer: Lydia Sanchez Part Number: xxxxxx-001 File Name: appg.doc
Last Saved On: 04/11/00 5:40 PM Last Saved By: Lydia Sanchez
Shipping Preparation
Follow these suggestions when preparing to ship your computer:
1. Back up the hard drive files onto PD discs, tape cartridges, or
diskettes. Be sure that the backup media is not exposed to
electrical or magnetic impulses while stored or in transit.
✎
The hard drive locks automatically when the system power is
turned off.
2. Remove and store any program diskettes from the diskette drives.
3. Insert a blank diskette into the diskette drive to protect the drive
while in transit. Do not use a diskette on which you have stored or
plan to store data.
4. Turn off the computer and external devices.
5. Disconnect the power cord from the electrical outlet, then from the
computer.
6. Disconnect the system components and external devices from their
power sources, then from the computer.
✎
Ensure that all boards are seated properly and secured in the
board slots before shipping the computer.
7. Pack the system components and external devices in their original
packing boxes or similar packaging with sufficient packing
material to protect them.
✎
For environmental nonoperating ranges, refer to Appendix A,
Specifications, in this guide.
To Next Page
Loading...
Need help?
General