Compaq Professional Workstation SP750 Hardware Reference Guide I-1
Compaq Confidential - Need to Know Required
Writer: Beth Zanca Part Number: 190709-001 File Name: index.doc
Last Saved On: 04/13/00 9:36 AM Last Saved By: Lydia Sanchez
I
NDEX
A
AGP graphics controller
connector, 1-3
expansion slot, 2-29
expansion slot, 1-4
installing, 2-29
removing, 2-30
Alert on LAN connector, 1-4
audio line-in, 1-3
audio line-out, 1-3
B
back processor cage fan connector,
1-4
battery, location, 1-4
buttons, power, 1-2
C
CD connector, 1-4
CD-ROM drive, 1-2
Chassis fan connector, 1-4
components
front panel, 1-2
hot surfaces, 2-2
installation precautions, 2-2
installation sequence, 2-2
rear panel, 1-3
configuration guidelines
RIMMs, 2-11
connecting the SCSI signal cable,
2-20
connectors
AGP graphics controller, 1-3
alert on LAN, 1-4
audio line-in, 1-3
audio line-out, 1-3
back processor fan, 1-4
CD, 1-4
chassis fan, 1-4
diskette drive, 1-4
headphone, 1-3
hood sensor, 1-4
IDE Ultra ATA, 1-4
keyboard, 1-3
memory board, 1-4
microphone, 1-3
mouse, 1-3
parallel, 1-3
power, 1-4
power cord, 1-3
power switch and LED, 1-4
processor fan, 1-4
RJ45, 1-3
SCSI, 1-4
SCSI option card and LED, 1-4
serial connector, 1-3
speaker, 1-4
Ultra3 SCSI connector, 1-3
USB connectors, 1-3
wake on LAN, 1-4
cooling shield
location, 2-18
removing, 2-18
replacing, 2-21
CRIMMs (Continuity RIMMs), 2-9
D
diskette drive connector, 1-4
drive bays, 2-14
drives
CD-ROM, 1-2
IDE, 2-14
E
E49 Jumper, 1-4
ECC, 2-5
electric shock, 2-2
Error Checking and Correcting
(ECC) memory. 5AA ECC
To Next Page
Loading...
Need help?
General