2-16 Hardware Upgrades
Compaq Confidential - Need to Know Required
Writer: Beth Zanca Part Number: 190709-001 File Name: ch2.doc
Last Saved On: 04/12/00 1:02 PM Last Saved By: Lydia Sanchez
Preparing for Drive Installation
Removing the Bezel Blank
You need to remove the drive bezel blank before installing any
removable media storage device, such as a tape drive, CD-ROM or
DVD-ROM drive, or diskette drive, in an empty bay location.
To remove the bezel blank:
1. Turn off the workstation and any external devices.
2. Disconnect the power cord from the grounded AC outlet and the
back of the workstation.
3. Remove the workstation access panel.
4. Remove the front bezel.
5. Loosen the thumbscrews and remove the bezel blank.
Removing the bezel blank from the subpanel
To Next Page
Loading...
