Hardware Reference Guide B-3
Compaq Confidential - Need to Know Required
Writer: Lydia Sanchez Part Number: xxxxxx-001 File Name: appb.doc
Last Saved On: 04/12/00 3:48 PM Last Saved By: Lydia Sanchez
Using Computer Setup Utilities
To access the Computer Setup Utilities menu, complete the following
steps:
1. Turn on or restart the computer. If you are in Windows, click
Start ! Shut Down ! Restart the Computer.
2. When the F10=Setup message appears in the lower-right corner of
the screen, press the F10 key.
✎
If you do not press the F10 key while the message is
displayed, you must restart the computer again to
access the utility.
3. Select your language from the list and press the Enter key.
4. A choice of five headings appears in the Computer Setup Utilities
menu: File, Storage, Security, Power, and Advanced.
5. Using the arrow keys or the Tab key, select the option you want
and press the Enter key. To return to the Computer Setup Utilities
menu, press the Esc key.
6. To apply and save changes, select File ! Save Changes and Exit.
❏ If you selected an option that automatically restarted the
computer, changes were applied at that time.
❏ If you have made changes that you do not want applied, select
Ignore Changes and Exit.
❏ If you have already applied changes you now want to
eliminate, select Set Defaults and Exit. This option will restore
the original factory system defaults.
To Next Page
Loading...
Need help?
General