B-12 Computer Setup
Compaq Confidential - Need to Know Required
Writer: Lydia Sanchez Part Number: xxxxxx-001 File Name: appb.doc
Last Saved On: 04/12/00 3:48 PM Last Saved By: Lydia Sanchez
Computer Setup Continued
Heading Option Description
Power Energy Saver Allows you to set the energy saver mode (advanced,
disable, or minimal).
Note: In the minimal energy saver mode setting, the
hard drive and system do not go into energy saver
mode, but the setting allows you to press the power
button to suspend the system.
This option is not available under ACPI-enabled
operating systems.
Timeouts Allows you to disable or manually select timeout
values for the system and/or all attached IDE hard
drives.
Note: This option is not available under ACPI-
enabled operating systems. This selection will only
appear when energy saver mode is set to advanced.
Energy Saver Options Allows you to set:
• power button configuration (on/off or
sleep/wake) under APM-enabled operating
systems
• power LED blink in suspend mode
(enable/disable). This option is not available
under ACPI-enabled operating systems.
Note: Energy Saver Options will not appear if the
energy saver mode is disabled.
Support for Computer Setup options may vary depending on your specific hardware configuration.
Continued
To Next Page
Loading...
