E-2 Security Lock Provisions
Compaq Confidential - Need to Know Required
Writer: Lydia Sanchez Part Number: xxxxxx-001 File Name: appe.doc
Last Saved On: 04/11/00 5:39 PM Last Saved By: Lydia Sanchez
2. Insert the tang (tongue) of the narrow bracket (Bracket A) into the
slot on the chassis and slide the U-shaped backet (Bracket B)
between it and the system unit cover; then install the self-tapping
screw included in the cable lock it.
✎
Due to differences between chassis, the slot may be located in
a different position than shown.
Installing brackets A and B
To Next Page
Loading...
