Setting the Scene Mode
By simply selecting one of the following 29 modes, you can capture the image with the most appropriate settings.
From the Record 1. MENU
button, tap to select Scene Mode. Or, tap onscreen Record mode button (red
color) to enter scene mode.
Use the 2.
and to move through the selections
The highlighted scene mode will either have text that describes the benefits of the mode or have a side-3.
bysidephoto comparison that illustrates the benefits. The photo on the left is a typical auto mode result and the
photo on the right illustrates the benefit of selecting that scene mode. It is important to note that by selecting a
particular scene mode (other that Auto) will take the camera out of it’s normal automatic settings capabilities and
therefore optimise various settings that match a specific scene.
Press the 4.
to save and activate the selected scene mode.
It is important to return the camera to the Auto mode when finished shooting specifics conditions. This will reduce 5.
the risk of taking a bad photo in normal situations. If the camera is powered off and then powered on, it will
return to Auto scene mode be default.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
