Short description Details Solution
ProtectTools, or HP Client Manager. To enable the
TPM embedded security chip:
1. Open Computer Setup by turning on or restarting
the computer, and then pressing F10 while the
F10 = ROM Based Setup message is displayed
in the lower-left corner of the screen.
2. Use the arrow keys to select Security > Setup
Password. Set a password.
3. Select Embedded Security Device.
4. Use the arrow keys to select Embedded Security
Device—Disable. Use the arrow keys to change
it to Embedded Security Device—Enable.
5. Select Enable > Save changes and exit.
HP is investigating resolution options for future
customer software releases.
Security Restore Identity
process loses association
with virtual token.
When user restores identity, Credential
Manager can lose association with the
location of the virtual token at login
screen. Even though Credential
Manager has the virtual token registered,
user must reregister the token to restore
association.
This is currently by design.
When uninstalling Credential Manager without keeping
identities, the system (server) part of the token is
destroyed, so the token cannot be used anymore for
logon, even if the client part of the token is restored
through identity restore.
HP is investigating long-term options for resolution.
26 Chapter 8 Troubleshooting ENWW
To Next Page
Loading...
