1 Introduction
HP ProtectTools Security Manager
ProtectTools Security Manager software provides security features that help protect against
unauthorized access to the computer, networks, and critical data. Enhanced security functionality is
provided by the following modules:
●
HP BIOS Configuration for ProtectTools
●
HP Embedded Security for ProtectTools
●
HP Credential Manager for ProtectTools
●
HP Java Card Security for ProtectTools
The modules available for the computer may vary, depending on the model. ProtectTools modules may
be preinstalled, supplied on CD that shipped with the computer, or available for purchase from the HP
Web site. Visit
http://www.hp.com for more information.
NOTE Refer to the ProtectTools Help screens for specific instructions for the ProtectTools
modules.
To use the Trusted Platform Module (TPM), platforms containing a TPM require both a TCG Software
Stack (TSS) and embedded security software. Some models provide the TSS; if the TSS is not provided,
it can be purchased from HP. Additionally, TPM-enabling software must be purchased separately for
some models. Please see
Third-Party Solutions for more details.
Accessing the ProtectTools Security Manager
To access the ProtectTools Security Manager from the Microsoft Windows Control Panel:
▲
Windows XP: Click Start > Control Panel > Security Center > ProtectTools Security
Manager.
▲
Windows 2000: Click Start > All Programs > HP ProtectTools Security Manager.
NOTE After you have configured the Credential Manager module, you can also log in to
Credential Manager directly from the Windows logon screen. For more information, refer to
HP
Credential Manager for ProtectTools.
ENWW HP ProtectTools Security Manager 1
To Next Page
Loading...
Need help?
General
