HP dc7900 - Convertible Minitower PC Setup And Configuration Guide

28
Remote Configuration Prerequisites
RCFG requires certain prerequisites before it can be used.
• Both the AMT system and the SCS must be on a DHCP server. The SCS must have the name of Pro-
visionserver, or if not, it must have an alias in DNS, and be on the same domain as the AMT sys-
tem.
• The AMT system must have at least one pre-programmed active root certificate hash.
• The SCS must have a server certificate with the proper OID or OU values.
• OID value in the Extended Key Usage field = 2 .16. 8 4 0 .1.113741.1. 2 .3
This is the unique Intel AMT OID.
• OU value in Subject field = Intel Client Setup Certificate
This OU value is case sensitive and must be entered exactly as shown.
• In the case of a Delayed Setup and Configuration, an operating system and local agent must be
installed on the AMT system.
MEBx and Hashes
AMT 5.0 has the feature in the MEBx to allow IT administrators to manually activate a hash and to add
up to three additional certificate hashes.
To enter the Remote Configuration screen in the MEBx:
1. Press Ctrl+P for the MEBx, and then type the MEBx password.
2. Select Intel AMT Configuration.
3. Select Setup and Configuration.
4. Select TLS PKI.

HP dc7900 - Convertible Minitower PC Specifications

General

Chipset	Intel Q45 Express
Memory	Up to 16 GB DDR2 SDRAM
Audio	Integrated High Definition Audio
Form Factor	Convertible Minitower
Processor	Intel Core 2 Duo, Core 2 Quad, Pentium Dual-Core
Storage	SATA Hard Drives
Graphics	Intel Graphics Media Accelerator 4500, optional discrete graphics
Optical Drive	DVD-ROM, DVD+/-RW
Network	Integrated Intel Gigabit Network Connection
Ports	USB 2.0, serial, parallel, audio in/out
Expansion Slots	PCI, PCIe x1, PCIe x16
Operating System	Windows Vista, Windows 7