HP dc7900 - Convertible Minitower PC Setup And Configuration Guide

31
Return to Default
Return to Default is also know as Unprovisioning. An AMT Setup and Configured system can be unprovi-
sioned. It is done through the AMT Configuration Screen and the Un-Provision option.
Figure 12 Intel AMT Unprovisioning Screen
Depending on how the system was previously provisioned, one or both unprovisioning options may
appear.
1. Select Un-Provision, and then select the appropriate unprovision mode.
Full unprovisioning is available for SMB and Enterprise mode provisioned systems. It will return all
AMT Configuration settings to factory defaults. All certificate hashes will be deleted and the default
hash will be made active. It does not reset ME Configuration settings or passwords.
Partial unprovisioning is available for Enterprise mode provisioned systems. Partial unprovisioning will
return all AMT Configuration setting to factory defaults with the exception of the PID, PPS, and PKI-
CH. It does not reset ME Configuration settings or passwords.
2. Select Return to previous menu.
3. Select Exit, and then select Y.
The system reboots.
A partial unprovisioning will re-open the network interface for six hours of Hello message broadcasts.

HP dc7900 - Convertible Minitower PC Specifications

General

Chipset	Intel Q45 Express
Memory	Up to 16 GB DDR2 SDRAM
Audio	Integrated High Definition Audio
Form Factor	Convertible Minitower
Processor	Intel Core 2 Duo, Core 2 Quad, Pentium Dual-Core
Storage	SATA Hard Drives
Graphics	Intel Graphics Media Accelerator 4500, optional discrete graphics
Optical Drive	DVD-ROM, DVD+/-RW
Network	Integrated Intel Gigabit Network Connection
Ports	USB 2.0, serial, parallel, audio in/out
Expansion Slots	PCI, PCIe x1, PCIe x16
Operating System	Windows Vista, Windows 7