The front panel may request that you load paper that is suitable for printhead alignment. The printhead
alignment procedure requires a roll of opaque paper: not a single sheet, and not any kind of transparent
or translucent material.
When the front panel displays Ready, you are ready to print.
NOTE Make sure the printer window and the right-hand door are closed after you replace the
supplies. The printer will not print while these are open.
Check the status of the ink system
1. Access the Embedded Web Server (see Access the Embedded Web Server).
2. Go to the Supplies page.
The Supplies page shows you the status of the ink cartridges (including the ink levels), the printheads,
the printhead cleaners, and the loaded paper.
Get ink cartridge statistics
To get information on your ink cartridges:
1.
Go to the front panel and select the
icon.
2. Select Ink cartridge information, then select the cartridge on which you want information.
3. The front panel displays:
●
Its color
● Its product name
88 Chapter 8 How do I... (ink system topics) ENWW
How do I... (ink system topics)
To Next Page
Loading...
