Change the palette settings
You cannot change the Factory palette, but you can define Palettes A and B to be whatever you choose. The
defaults are Palette, width:
How to define Palette A
Item Available options Defaults
Palettes Factory, A, B. Factory
Pens 0 through 15.
Widths (mm) 0.13, 0.18, 0.25, 0.35, 0.50, 0.65, 0.70, 0.80, 0.90, 1.00,
1.40, 2.00, 3.00, 5.00, 8.00, 12.00.
Note that 0.13 mm is a one-pixel line width at 300 dpi
and three-pixels line width at 600 dpi.
0.13 mm
Colors 0 through 255. As specified on the Palette
Print.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...