124 Chapter 4 Service Tests, Utilities & Calibrations
Tests, Utilities & Calibrations
2. A message will display on the Front Panel asking whether you would like to check the Formatter.
Select Yes, and press OK to confirm your selection.
3. The printer will get the CPU information and display the information on the Front Panel. Press any key
to continue the test:
4. The printer will now get the CPU Fan Speed and display the information on the Front Panel. Press
any key to continue the test:
If the CPU Fan Speed is less than 2500, the Front Panel will display system error code 05.1:10 ⇒
page 79.
5. The printer will now calculate the amount of memory installed and display the information on the
Front Panel. Press any key to continue the test:
A minimum of 256 megabytes of memory must be installed in the Printer. If not, the Front Panel will
display system error code 05.3:10 ⇒ page 80.
6. A message will display on the Front Panel asking whether you would like to check the Printer
Configuration. Select Yes and press OK to confirm your selection.
To Next Page
Loading...