HP Designjet L25500 Printer series - Page 148

140 Chapter 4 Service Tests, Utilities & Calibrations
Tests, Utilities & Calibrations
If the Maintenance Cartridge Door Sensor fails the test, the Front Panel will display system error code
51.1:10 ⇒ page 107.
10. The Media Lever Sensor will be tested next. When the following message is displayed on the Front
Panel, raise the Paper Lever and press any key to continue.
11. If the Media Lever Sensor passes the test, the following message is displayed on the Front Panel.
Lower the Paper Lever and press any key to continue.
If the Paper Lever Sensor fails the test, the Front Panel will display system error code 54:10 ⇒
page 108
.
12. The Media Sensor will be tested next. When the following message is displayed on the Front Panel,
raise the Media Lever, load paper, lower the Media Lever, and press any key to continue.
13 . If the Media Sensor passes the test, the following message is displayed on the Front Panel, raise the
Media Lever, unload paper, lower the Media Lever, and press any key to continue.
If the Paper Lever Sensor fails the test, the system error 53:10 is displayed ⇒ page 108