Service Menu 181
Tests, Utilities & Calibrations
Service Menu
1. Service Test and Utilities Menu ⇒ page 182
2. Image Quality Plots⇒ page 196
3. Inks On Substrate Test ⇒ page 199
4. Reset Life Counters ⇒ page 199
5. Service Calibration menu ⇒ page 201
These service utilities help you to service, maintain, and clean the printer. This section guides you through
the service utility procedures and provides information about each utility.
Entering the Service Utilities Menu
1. Once the message “Ready” is displayed on the front-panel, scroll to the “Printer Setup Options” icon
and press the Enter key.
2. For Call Agents who will request the user to perform certain Service Utilities, once inside the “Setup”
menu, press the Down arrow key and the Cancel key together. You are now in the Service Tools
Menu.
3. For On-Site Engineers, once inside the “Setup” menu, press the Up arrow key and the Cancel key
together. You are now in the Service Tools Menu.
To Next Page
Loading...