Clean OMAS
and reload the
paper
There is
an
advance
issue
Launch the Visual Paper
Advance Diagnostic using
HP Glossy paper
b
provided
for the calibration. Refer to
page 233 for the details of
the calibration.
Issue fixed?
Launch the user
advance
calibration
adjustment
Acceptable Visual
Paper Advance Plot?
Replace the
OMAS
CLOSE
Launch the
Visual Paper
Advance
Diagnostic using
the Customer’s
paper
Acceptable Visual
Paper Advance Plot?
is the media in
the list of non-
OMAS navigable
media
a
CLOSE
Replace the
OMAS
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
It could be a
limitation of the
customer’s
paper
Replace the
OMAS
Is the issue
fixed?
CLOSE
NO
YES
Perform the Paper
Advance Calibration,
Refer to chapter 4.
b
In order to perform this Calibration, you
should order the Paper Advance
Calibration Kit (Part Number Q1273-
60296) which contains two cut sheets of
HP Universal Instant-dry Gloss Photo
media (36-inches wide by 42-inches long).
c
‘OMAS Blinking’ means that the red LED
in the OMAS lens blinks ON/OFF during
paper advance when OMAS is operating.
a
List of types of media which are NOT
used (non navigable) by the OMAS media
sensor:
HP or HP Approved Clear Film
HP or HP Approved Backlit
HP or HP Approved types of Matt film
HP or HP Approved types of
Polypropylene
A non HP or HP Approved Media
OMAS
Blinking?
NO
YES
OMAS
Blinking
c
?
is the media in
the list of non-
OMAS navigable
media
a
Perform the
TOMAS check
Test passed
YES
Replace the
TOMAS
NO
To Next Page
Loading...