HP Designjet L25500 Printer series - Page 439

TOMAS Cable 433
Removal & Installation
TOMAS Cable
Removal
1. Remove the Right Cover ⇒ See page 319 .
2. Primer Assembly ⇒ See page 355.
3. Primer Valves ⇒ See page 357.
4. Remove the Drop Detector ⇒ See page 377.
5. Remove the Service Station ⇒ See page 364.
6. Remove OMAS ⇒ See page 424.
7. Remove TOMAS ⇒ See page 431.
8. Unroute the TOMAS Cable from the right side of the
chassis.
9. Remove the TOMAS cable from the hole in the chassis.
WARNING!: Switch off the printer and remove the power cable.