Curing Fans & Cover 503
Removal & Installation
Curing Fans & Cover
Removal
1. Remove the Left Cover
⇒
See page 325
.
2. Remove the Left Curing Cover
⇒
See page 328.
3. Remove the Right Curing Cover
⇒
See page 330.
4. Disconnect the Curing Fans Cable from the left of the
printer.
5. Disconnect the Left Window Sensor Cable.
6. Remove one T-20 screw from the left side of the Curing
Module (screw closest to the printer).
WARNING!: Switch off the printer and remove the power cable.
To Next Page
Loading...