HP Designjet L25500 Printer series

Removing the Consumables 609
Repacking
Removing the Consumables
1. Remove the Substrate ⇒ Users guide .
2. Remove the Printheads ⇒ Users guide
3. Remove the Ink Cartridges ⇒ Users guide
4. Remove the Printhead Cleaning Cartridge ⇒ Users
guide.
5. Remove the Ink Funnel ⇒ Users guide
6. Remove the Printhead Cleaning Container ⇒ Users
guide
7. Install the orange caps onto the Printheads, and place
them in the original packaging. Seal with adhesive
tape.
8. Place the Printheads in the original packaging, and
seal with adhesive tape.
WARNING!: Switch off the printer and remove the power cable.